Tumble dryer displays error message "Err"
Resolution
Issue
- Tumble dryer displays error message "Err". It appears when there is an attempt at changing a cycle or settings after the cycle has started or chosen option cannot be used with the selected cycle.
Applies to
- Vented dryer
- Condenser dryer
- Heat pump dryer
Resolution
1. Switch the dryer off and on, then select the desired cycle and options.
Additional information can be found in the user manual.
Download the .
2. Make sure that the door is fully closed before starting the programme.
Was this article helpful?
Related Articles
- Condenser tumble dryer taking too long to finish
- Clothes are still wet at the end of the drying cycle
- Drying Temperature in Heat Pump Tumble Dryer
- Tumble dryer ends the programme immediately after the start
- Tumble dryer displays error code E54
- Tumble dryer emits unusual noises
- Tumble dryer’s water tank is empty
- Tumble dryer displays error message EHO, EH0
- Tumble dryer not drying, not drying properly, too long drying
- Water leakage from under the dryer