Blocked condenser (condenser dryers)
Resolution
Check and clean the condenser
Time: 5 min
Cleaning the tumble dryer condenser (applicable to condenser dryer)
If the symbol Condenser flashes on the display, inspect the condenser and its compartment. If it is dirty, clean it.
A dirty condenser will cause poor drying results.
{UM|Access to the condenser may slightly differ depending on the dryer model, refer to the user manual}
Note: Do not operate the tumble dryer when the condenser is blocked with fluff. This could cause damage to the tumble dryer. This also increases energy consumption.
Step 1: Open the door, then open the condenser cover
Step 2: Turn two levers to unlock the condenser lid
Step: 3 Lower the condenser lid
Step: 4 Catch the handle and pull the condenser out from the bottom compartment
Move the condenser horizontally to avoid spilling any remaining water.
Step 5: Clean the condenser in a vertical position over a basin
Rinse through with a hand shower.
