Water conductivity/dryness level

Resolution

Check the hardness level of your water and change the settings of your dryer accordingly for the best drying results

Time: 1 min

Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations thus varying its conductivity values. Relevant variations of the conductivity of the water compared to those prefixed by the factory could influence the residual humidity of the laundry at the end of the cycle.

For the best drying result, the setting should be set to CO_ once. If the setting of the standard drying levels is not set correctly, this can cause a poor drying result.

{UM|Check how to set the standard drying levels in the user manual}

Was this article helpful?