Fridge freezer shows a line (“— “) on the display
Issue
- Fridge freezer shows a line (“— “) on the display
- The temperature inside the fridge is lower than 0°C
Applies to
- Fridges / Freezers
Resolution
1. Check whether the appliance is cooling correctly.
- Measure the temperature with a thermometer in a glass of water placed inside the fridge. If the temperature is between +4 to +5°C, the fridge is working correctly.
- The core temperature of foodstuffs is more important than the internal air temperature of the fridge, as air temperature will fluctuate during each refrigeration cycle (between the refrigeration compressor starting and stopping).
- Please note that cheaper thermometers may show variations of ±1–2°C or more.
- Adjust the temperature by turning the temperature regulator or via the control panel.
2. Contact an Authorized Service Center.
If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Fridge Door Will Not Close
- Ventilation on Integrated and Freestanding Fridge Freezer
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Temperature in the fridge-freezer is too low
- Why is my fridge frosting up?
- French door fridge-freezer displays HI (freezer compartment)
- My fridge freezer is not working
- How to install your AEG appliance - video guides
- Drip tray location on integrated fridge freezer
- AEG fridge and freezer care guide: Do's and Don'ts
Related Articles
- Fridge Door Will Not Close
- Ventilation on Integrated and Freestanding Fridge Freezer
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Temperature in the fridge-freezer is too low
- Why is my fridge frosting up?
- French door fridge-freezer displays HI (freezer compartment)
- My fridge freezer is not working
- How to install your AEG appliance - video guides
- Drip tray location on integrated fridge freezer
- AEG fridge and freezer care guide: Do's and Don'ts