How to replace glass cooking top with control knob
Resolution
Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/
WARNING! RISK OF ELECTRIC SHOCK
Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
WARNING! RISK OF INJURY
Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.
WARNING! RISK OF EYE INJURY
Wear safety glasses if you perform maintenance or repair work involving springs.
WARNING! RISK OF BURNS
Before any repair or maintenance operation make sure the appliance is not hot.
WARNING! CHOKING HAZARD
Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.
Only adults should use or install the product.
Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.
Do not use or install the product if damaged.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.
HOW TO REPLACE GLASS COOKING TOP WITH CONTROL KNOB
Unlocking tool 140067355010 is required for this repair.The underside of the hob may scratch the surface it’s on, it is advised to place a towel on the working surface to avoid scratches.
1. Lift the control knob up to remove from the hob top.
2. When the glass is removed push through the gaskets for each control knob.
3. Push the tool up into the slot on the hob to release the side clips of the hob glass.
4. Using the tool unclip the glass in all positions on the hob glass. Number and placement of clips may vary depending on the appliance.
5. Lift the glass from the hob.
6. Place the new hob glass gently onto the frame and line up all of the clips in the correct position (ensure all the clips are correctly positioned with the tension spring on the outside of the body and the clip on the inside of the body).
7. Press firmly on all sides of the hob to push the clips into place.
