Tumble dryer displays error message C8
Resolution
Issue:
- Tumble dryer displays error message C8
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C8, there is a problem with the temperature sensor.
2. To resolve the issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Water leakage from under the dryer
- Tumble dryer displays error message E50
- Tumble dryer ends the programme immediately after the start
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- How to reset WiFi network settings on my AEG dryer
- Moisture, condensation, water in tumble dryer
- Tumble dryer displays error code E70
- Tumble dryer displays error message E60 and does not heat up
- Tumble dryer does not start / does not work
- Tumble dryer not drying, not drying properly, too long drying