Tumble dryer's Condenser LED is on
Issue
- Tumble dryer Condenser LED/icon is on
Applies to
- Heat pump tumble dryer
- Condenser tumble dryer
Resolution
If your tumble dryer's Condenser LED is on, it typically means that the condenser unit needs cleaning. This is a common maintenance alert found on condenser and heat pump tumble dryers.
1. Clean the condenser, filters and air ducts.
Picture 1. Condenser LED on tumble dryer display
Refer to the article: Cleaning tumble dryer filters and condenser
Visit our YouTube channel for more tips and tricks
How to Maintain a Tumble Dryer
2. Contact an Authorized Service Center
If the above suggestions do not solve the problem, we recommend requesting a visit by a service engineer.
Cause
- Condenser needs cleaning
Was this article helpful?
Related Articles
- Tumble dryer displays error code E70
- Tumble dryer displays error message E60 and does not heat up
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- Tumble dryer does not start / does not work
- Tumble dryer not drying, not drying properly, too long drying
- Start - Pause LED flashes on tumble dryer
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays a padlock
- Clothes are still wet at the end of the drying cycle
- Heat pump dryer's drying cycle is too long