An acoustic signal is heard and the gas plate switches off by itself
Issue
- An acoustic signal is heard and the gas hob switches off by itself
- An acoustic signal sounds when the hob is deactivated
Applies to
- Electronic Gas hobs
Resolution
1. Remove the object from the sensor fields.
2. Avoid touching the sensor field for more than 10 seconds.
Cause
- You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Was this article helpful?
Related Articles
- Only one side of the hob is operating
- The induction hob is noisy, makes a humming sound
- What cookware is suitable for cooking zones with induction heating?
- TotalFlex Hob will not detect pans and cookware
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The induction hob cannot be started after a short circuit
- Electric Hob Installation Faults
- Induction hob emits an unusual sound
- The ignition on my gas hob keeps sparking