Hob blows/ trips fuse
Issue
- Hob/cooker continuously blows / trips the fuse
- Hob tripping power
Applies to
- Induction hobs and cookers
- Ceramic hobs and cookers
- Gas hobs and cookers
Resolution
1. Make sure that the fuse is sufficient for the power load.
Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.
2. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays error message E9
- The ignition on my gas hob keeps sparking
- Hob displays error message E8 / E822
- Induction hob emits an unusual sound
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Symbols and functions on your AEG induction hob
- Hob displays message P
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.