Symbols and functions on your AEG induction hob

PowerBoost 
Provides extra power to the selected zone, delivering a quick burst of heat. Makes water boil almost instantly. 

How to use it 
1. Select the desired cooking zone. 
2. Press symbol to turn on.
3. To turn off, manually select the zone again and change the heat level. 

Important
Because of its speed and power, be careful when using oil and don’t leave the pan unattended.

Pause 
Pauses all active zones. They are automatically set to the lowest heat level. The previously set heat levels will resume when turning off the pause function. 

How to use it
1. Press symbol to turn on.
2. Press symbol again to turn off.

Good to know

• Running timer functions will remain turned on.
• Other functions on the control panel will not be possible to turn on. 
• This function can’t be used when certain other functions are running, e.g., Assisted Cooking or Sous Vide.

Lock / Child Lock
Locks the control panel, preventing unintentional operation of the hob while cooking or cleaning it. 

Learn how to use the lock function and child lock.

Timer, count-down 
Set the cooking duration for a specific zone. The hob will beep when the time has passed, and the zone will automatically turn off.

How to use it 
1. Set the heat setting for the zone.
2. Press symbol to turn on.
3. Press either + and – or slide the controls on the digital screen to set the length of desired cooking time. 

Good to know
Depending on your specific model, you may find individual timers next to each zone. The steps to use these timers are the same as above.

Eco Timer
Set the cooking duration for a specific zone. The zone will automatically turn off before the countdown timer completes. Leftover heat will continue to cook your dish, saving energy. 

Check the user manual to learn how to use the timer on your model.

Timer, count-up 
Monitor how long you have been cooking. 

Check the user manual to learn how to use the timer on your model.

Minute Minder 
Standalone timer, not connected to any zone 

How to use it
1. Press symbol to turn on. 
2. Press + and – to set the number of minutes.

Bridge function 
Combines two zones to accommodate larger cookware. The bridged zone shares the same temperature and time settings when turned on. 

How to use it
1. Press symbol to turn on.
2. Set the heat level.
3. Press symbol again to turn off.

Good to know 
The cookware must cover the centres of both zones and should only extend within the marked area.

FlexiBridge
Adapts your induction hob's left area into two medium-sized zones, a small and a large, or one extra-large. 

Learn how to use the FlexiBridge function.

PowerSlide 
Move cookware between three pre-set temperature areas to quickly switch between different heat levels.

How to use it
1. Press symbol to turn on. 
2. Place the cookware in the front, middle or rear position. The front zone has the highest heat setting. For a lower heat setting, move the cookware to middle or rear position. 
3. Press symbol to turn off. 

Good to know
The pre-set temperatures can be adjusted following the instructions in the user manual.

TotalFlex 
Automatically detects different shapes and sizes of cookware, creating a dedicated cooking area. Ideal when using various cookware types. 

Learn how to use the TotalFlex cooking zones.

XL Zone
Cook with larger cookware and even paella dishes on this extra-large zone. The heating area will automatically adjust to match the size of your cookware.

SenseBoil®, integrated boiling sensor 
Detects when the water reaches its boiling point and automatically adjusts the temperature to reduce it to a simmer. 

Learn how to use the SenseBoil® function.

SenseFry, integrated frying sensor 
Controls and regulates an even temperature across the hob's surface and the cookware.

Learn how to use the SenseFry® frying sensor.

SensePro®, standalone food sensor 
Measures the core temperature of food and liquids, allowing you to boil, fry, and sous-vide at precise temperatures. 

Learn how to use the SensePro® food sensor.

Hob2Hood®
Wirelessly links your hob to your hood via an infrared signal. When you start cooking, the hood’s fan speed is regulated based on the heat settings selected on the hob.