Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- What is the optimal temperature in the fridge / freezer?
- Why is my fridge frosting up?
- Serial number/Model number/Product number (PNC) on my fridge freezer
- How to install correctly my refrigerator / freezer / fridge freezer?
- Food freezing In fridge
- Moisture in the vegetable drawer or under the glass shelf in the fridge
- Temperature in the fridge-freezer is too low
- Display of my fridge / refrigerator/ freezer is not working after a power cut
- Fridge freezer shows F7 on the display
- My fridge freezer is not working