How to disable the AirDry function in a dishwasher with a QuickSelect panel (level 1)
Issue
- I cannot turn off AirDry function
- How to disable AirDry function in dishwasher?
- How to disable the automatic door opening in the dishwasher?
Resolution
To disable the AirDry function in a dishwasher with a QuickSelect panel (level 1), follow the steps below:
- Activate basic settings mode by pressing and holding 30min and ECO, wait for the indicators
and ECO to start flashing, the 
and 
indicators will light up, and the MY TIME lights will illuminate. - Press the 30min button until the drying phase indicator starts flashing
. - Press the button 90min and only the drying phase indicator will light up, the rest will turn off
- If you want to change the setting, press the ECO, if the indicator
is lit, the function is enabled, if it goes out, the function is disabled. - Press the "90 MIN" button to confirm the setting
- Exit the basic settings mode by pressing "30 MIN" and ECO until the appliance returns to the programme selection mode.
Was this article helpful?
Related Articles
- Symbols & programmes on your AEG dishwasher
- How to deactivate/turn off AirDry/door opens automatically on AEG dishwasher
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher door will not close properly or is crooked
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwashers has poor washing results
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Water is being filled into the dishwasher even when it is turned off
- Where and how do I change the basic settings on my AEG dishwasher