Induction hob displays error code F or F1

Issue

• Error code “F” appears on the display of induction hob
• Error code “F1“, "F2", "F3" appears on the display of induction hob
• SenseBoil function does not work

Applies to

• Induction Hobs

Resolution

If your hob has only just been installed and it is showing a constant "F" - get your approved installer to double-check it has been installed correctly, according to the model-specific installation instructions.

If you have had your hob a while and it has been correctly installed and it is showing a flashing "F":

1. Check if the pot you chose is suitable for induction hobs by using a fridge magnet to test the magnetic reaction on the base of the pan. If the magnet sticks, your pot should be suitable for induction.

• The function does not work with cast iron and non-stick cookware, e.g. with a ceramic coating.
• Enamelled steel pots are recommended for achieving the best results when using induction hobs.

Suitable cookware is available on our Webshop .

2. Make sure your pan isn’t too big or too small for the zone you are trying to use.

3. Make sure the hob and pans are dry.

4. Only heat the zone that is in use.

5. Put the pan on the zone you want to use before turning it on.

6. Turn the zone off before removing the pan.

If you have tried the above, try switching it on and off from the mains for 30 seconds.

If none of the above has worked or your hob is showing F and digit code (e.g.: "F3", etc.) then we recommend booking a service engineer to have a look to determine the fault.

Learn more from our hob experts: Hob Care & Repair Advice from AEG Experts

What to do do when the hob is not working as expected: Hob Repair Service | In and Out of Warranty

Still need help? Get expert support

If the issue continues, a professional technician can help diagnose and fix the problem.
No matter if your appliance is in warranty, out of warranty, or covered by an appliance protection plan — we’ll guide you to the right service.

Book a repair online