My robotic vacuum cleaner shows error code E17
Issue
- My robotic vacuum cleaner shows error code E17 on the display
Applies to
- robotic vacuum cleaners
Resolution
1. Move the robot and charger to a new location and start again
2. Put the robot back in the charging station and restart it after charging is complete.
3. Reset the robot by disconnecting one battery for 30 seconds and re-installing it.
4. If the above suggestions did not solve the problem contact an Authorized Service Center.
Was this article helpful?
Related Articles
- Robotic Vacuum main brush malfunction: How to Resolve It
- Updating the robotic vacuum's software
- Get started with your AEG robotic vacuum cleaner
- What is the minimum height of furniture under which a robotic vacuum cleaner can operate?
- Robotic vacuum could not find charging station
- Updating the smart phone app
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
- If the robotic vacuum gets stuck (under the bed, between the chairs)