Oven displays code F102
Issue
- oven shows error code F102 when you turn the appliance on
Applies to
- Ovens
- cookers
Resolution
1. The door lock may be defective, fully close the door.
2. Deactivate the oven by isolating it for a few minutes and plug it back in, alternatively, check the house fuse or the safety switch in the fuse box and activate it again if possible or consult a qualified electrician
3. If the display shows "F102" again, contact the Customer Care Department to arrange a service visit.
Cause
- door not fully closed
- problem with the electronics
Was this article helpful?
Related Articles
- How to use the Aqua Clean function on your Oven
- How to set an oven clock
- Symbols and functions on your AEG oven or cooker
- AEG oven displays SAFE or padlock symbol
- Using the Oven Grill Function
- Steam cooking – how to fully utilise your AEG steam oven
- How to use Steamify® on your AEG steam oven
- Oven does not heat up
- Connected oven shows fault F215 in display
- The door of the oven does not close properly