How to use the Aqua Clean function on your Oven
Issue
- How to use Aqua Clean on your AEG Oven
Applies to
- Ovens
Resolution
This cleaning procedure uses steam/humidity to help remove remaining fat and food and particles/debris from the interior of the oven enamel-coated cavity.
Step 1 Pour water into the cavity embossment: 200 ml.
Step 2 Use the SteamBake function and set the temperature to 90 °C on TrueFan setting
Step 3 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Wipe out and then dry the oven cavity with a soft cloth.
Was this article helpful?
Related Articles
- The door of the oven does not close properly
- How to remove a built-in oven door (video)
- How to use Catalytic Cleaning on your AEG oven
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- AEG oven care guide: Do's and Don'ts
- How To Set Extended Cooking Time Function
- How to set the clock on an AEG oven
- What Is The Best Oven Function For Frozen Food? (Bottom Grill and Fan Setting)
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
Related Articles
- The door of the oven does not close properly
- How to remove a built-in oven door (video)
- How to use Catalytic Cleaning on your AEG oven
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- AEG oven care guide: Do's and Don'ts
- How To Set Extended Cooking Time Function
- How to set the clock on an AEG oven
- What Is The Best Oven Function For Frozen Food? (Bottom Grill and Fan Setting)
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)