The oven with rotary knob does not start
Resolution
Issue:
- The oven does not start, even though the action on the screen, for example "Refill Water", has been completed
- The oven is not heating
Applies to:
- ovens equipped with display and following rotary knob
Resolution:
1. All prompts shown on the display, such as "Refill Water", must be confirmed by pressing the rotary knob.
- Hold the rotary knob to turn on the setting screen.
- Hold and turn the rotary knob to navigate through the menu.
- Hold and press the rotary knob to confirm a setting or enter the selected submenu.
- To return to the previous menu find the option "Back" in the menu list (this will be at the top of your current list) or confirm a selected setting.
2. Ensure that Childlock is not enabled
- The screen will show "BCA", enter "ABC" to unlock
- For more help with Childlock, .
3. Ensure that Demo Mode is not enabled
- The screen will say 'demo' in one corner and oven will not heat up.
- For help on switching demo mode off, .
If these prompts have not resolved the issue, you may need to contact an Authorised Service Engineer. You can do that with the link on the right side of this page.
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.