Tumble dryer displays error message C6
Resolution
Issue:
- Tumble dryer displays error message C6
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C6, there is a problem with the moisture sensor.
The cycle takes longer than normal, more than 4.5 hours.
- Check if the machine is connected to an grounded socket.
- If not, there is a problem with the moisture measurement, which can be repaired by an Authorized Service Center.
2. To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Tumble dryer’s water tank is empty
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Tumble dryer not drying, not drying properly, too long drying
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Warning light(s) of tumble dryer cannot be switched off
- Condenser Dryer Drain Kit
Related Articles
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Tumble dryer’s water tank is empty
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Tumble dryer not drying, not drying properly, too long drying
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Warning light(s) of tumble dryer cannot be switched off
- Condenser Dryer Drain Kit