Washing machine displays 1- minute pause
Issue
- Washing machine displays 1- minute pause
Applies to
- Washing machines
Resolution
It is normal for the washing machine to display 1-minute pause for easy care and gentle cycles.
- After a wash cycle, there is an anti-crease cycle which lasts about 30 minutes.
- During this remaining cycle, the display will show 1 minute, for example, and the OFF indicator light will illuminate.
- The laundry may be removed from the machine by pressing the START/PAUSE button.
- Turn the cycle button to off or switch off the machine via the power switch.
- The wash cycle is now complete.
If the above suggestion does not resolve the issue, contact an Authorized Service Center.
Was this article helpful?
Related Articles
- How the Delay Start Function Works on Washing Machines
- Top loading washing machine does not have a filter/filter cannot be located
- Washing machine’s fluff filter is jammed, cannot be removed
- How to change the temperature in the ECO 40-60° program?
- How to clean and maintain your AEG washing machine and extend its life
- AEG Washing Machine displays an error code - causes and solutions
- The door of the washing machine cannot be opened
- Washing Machine Not Draining Water – Error Code E20 or E21
- Removing and cleaning a washing machine detergent dispenser drawer
- Foam and detergent powder residue in washing machine
Related Articles
- How the Delay Start Function Works on Washing Machines
- Top loading washing machine does not have a filter/filter cannot be located
- Washing machine’s fluff filter is jammed, cannot be removed
- How to change the temperature in the ECO 40-60° program?
- How to clean and maintain your AEG washing machine and extend its life
- AEG Washing Machine displays an error code - causes and solutions
- The door of the washing machine cannot be opened
- Washing Machine Not Draining Water – Error Code E20 or E21
- Removing and cleaning a washing machine detergent dispenser drawer
- Foam and detergent powder residue in washing machine