Washing machine's door opens in the middle of a cycle
Resolution
Issue
- Washing machine's door opens in the middle of a cycle
Applies to
- Washing machine
Resolution
- Make sure there is not too much laundry in the drum (overloading)
- If the problem persists, contact an authorized service centre
Cause
- Too much washing in the drum causing pressure against the door
- The door or door lock is defective
Was this article helpful?
Related Articles
- Connected appliances - The appliance cannot be registered
- How to stop your washing machine vibrating and reduce noise / unbalanced load / reduce vibration during rinse
- Washing machine displays "CLE" - drum cleaning reminder
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- The door of the washing machine cannot be opened
- How to remove transit bolts from your AEG washing machine
- Washing machine stops in the middle of a cycle
- Connected appliances - problems with onboarding and Wi-Fi connection