AEG cooker hood care guide: Do's and Don'ts

Resolution

Regular cleaning and maintenance help keep your AEG cooker hood working efficiently. Follow these simple do’s and don’ts to keep your appliance performing at its best.

General appliance care

The do’s

• Do clean the metal grease filters regularly. Wash reusable aluminium or steel filters approximately every 40 hours of use, or once a month.

• Do switch off the power supply before cleaning. Unplug the cooker hood or turn off its power supply before removing filters or cleaning the appliance.

• Do follow the filter maintenance alerts. If your cooker hood has a filter indicator, clean or replace the filters when the indicator lights up.

• Do wipe down the exterior regularly. Use warm water, mild washing-up liquid and a soft microfibre cloth, then dry thoroughly to prevent water marks.

The don’ts

• Don’t use the cooker hood without its filters. Always make sure the filters are correctly fitted before turning it on.

• Don’t use harsh chemicals or abrasive cleaning tools. Scouring pads and wire wool can scratch or damage stainless steel, painted metal and glass surfaces.

• Don’t let grease build up in the filters. Excess grease can reduce extraction performance, increase fan noise and create a fire risk.

Metal grease filters (aluminium and stainless steel)

The do’s

• Do wash the filters by hand or in the dishwasher. Use warm water, mild washing-up liquid and a soft sponge or brush for handwashing, or a short, low-temperature dishwasher cycle.

• Do let the filters dry completely. Allow them to air-dry before putting them back in the cooker hood.

The don’ts

• Don’t be concerned about slight discolouration. Dishwasher detergents may change the colour of metal filters over time, but this doesn't affect their performance.

• Don’t reuse filters that are too clogged to clean. If you can't remove the grease build-up thoroughly, replace the filter with a new one.

Carbon and odour filters

The do’s

• Do check which type of carbon filter you have. Cleaning methods and replacement schedules vary depending on the filter type:

– OdourClean (standard carbon filters): Replace every 4–6 months. These filters are disposable and cannot be washed.

– OdourClean Plus: Clean every 3–4 months. Wash by hand with hot water and no detergent, or in the dishwasher without other dishes. Air-dry or oven-dry as instructed in your user manual. These filters typically last 2–3 years.

– OdourClean Pro: Regenerate every 5–6 months. Wipe away surface dirt with a damp cloth, then regenerate in the oven according to your user manual. These filters can last up to 5 years.

• Do replace disposable carbon filters regularly. Follow the recommended replacement schedule for your specific model to maintain effective odour absorption.

The don’ts

• Don’t wash disposable carbon filters. Standard carbon filters cannot be cleaned with water, as this can damage the filter material.

• Don’t wash carbon filters with dirty dishes. When cleaning dishwasher-safe carbon filters, run a separate cycle without dishes or food residue.

• Don’t put filters back while they’re warm or damp. Allow cleaned or regenerated filters to cool and dry completely before placing them in the cooker hood.

A little regular maintenance goes a long way. Keep your cooker hood in great condition with the right care products, spare parts and accessories.

Explore our cooker hood care products.