Dishwasher's On / Off button does not work

Resolution

Issue:

• Dishwasher's On / Off button does not work

Applies to:

• dishwasher

Resolution:

1. Check if the dishwasher plug is inserted in the socket and switched on.

• You can check whether there is power at the socket by plugging in another appliance and seeing whether that works as it should.
• If the socket does not work, contact a local electrician to help resolve the problem.
• 
  

2. Check if one of your relays has tripped or has a fuse blown.

• Reset the circuit-breaker / RCD device or replace the fuse
• You can reset the circuit-breaker by pushing the switch to the "ON" position.
• If you have an older-type fuse box, the fuses must be replaced.
• To do this, contact an electrician for assistance.

3. If the above suggestions do not resolve the issue, we recommend requesting a visit by a service engineer as it suggest an internal fault with the appliance that we would not recommend attempting to rectify yourself.

Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.

If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.