Display of my washing machine is blurry
Issue
- Display of my washing machine is blurry
Applies to
- Front loading Washing Machines
- Top loading Washing Machines
Resolution
If the display of my washing machine is blurry, refer to the suggestions below for step by step instructions.
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Opening washing machine's door at the beginning of wash cycle
- The door of the washing machine cannot be opened
- After cleaning the pump filter, the washing machine hums and does not start washing
- How to drain a washing machine/washer dryer
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine emits humming / pumping noise
- Washing machine stops in the middle of a cycle
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine displays "CLE" - drum cleaning reminder