Display of washer dryer is blurry
Issue
- Display of washer dryer is blurry
Applies to
- washer-dryer
Resolution
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
- If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Washer dryer displays error message E90, E91, E92, E93 or E94
- Washer - dryer does not switch on after a drying cycle
- Clothes are too creased after washing in the washer dryer
- Washer dryer emits unpleasant smell, how to clean the washer-dryer
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- LED flashes on the washer - dryer's display
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer-dryer displays error message E50, C9 or F9