Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Broken freezer drawers - AEG
- Is the temperature inside the fridge freezer the same in every part?
- My fridge freezer is not working
- Why is my fridge frosting up?
- The light does not work in my fridge-freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Fridge freezer shows F6 on the display
- Fridge Door Will Not Close
- Replacing shelves/lamp bulbs/accessories in my AEG Fridge / Fridge Freezer
- Fridge freezer shows a line (“— “) on the display