Gas hob displays message F
Issue
- Gas hob displays message F
- "F" comes on
- One or more burners cannot be ignited on electronic gas hob
Applies to
- Electronic Gas hobs
Resolution
1. Deactivate and activate the hob.
- After light animation, when "F" reappears, touch "||" and then
within 3 seconds. - When you see "0" the fault is reset.
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The induction hob is noisy, makes a humming sound
- Induction hob emits an unusual sound
- How to use the OnePot Pasta function on your AEG hob
- Hob displays message L, the hob is locked
- What Cookware Works on Induction (Complete Guide)
- Induction Hob Installation Faults: Error Codes, Causes & Support
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Hob displays message A
- Symbols and functions on your AEG induction hob
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- The induction hob is noisy, makes a humming sound
- Induction hob emits an unusual sound
- How to use the OnePot Pasta function on your AEG hob
- Hob displays message L, the hob is locked
- What Cookware Works on Induction (Complete Guide)
- Induction Hob Installation Faults: Error Codes, Causes & Support
- One of the rings on my Gas Cooker/Hob won’t stay alight?
- Hob displays message A
- Symbols and functions on your AEG induction hob