Only one side of the hob is operating
Issue
- Only one side of the hob is operating.
- Half hob/zones not working
Applies to
- Integrated induction hob
- Freestanding cooker with induction hob
- Integrated electric hob
- Freestanding cooker with electric hob
Resolution
1. Check if the appliance is correctly connected to the electrical supply.
Ensure the electrical connection in the appliance connection box is correct as per the installation instructions.
If the appliance requires a link connection to be fitted ensure this is fitted correctly.
2. Contact an Authorised service centre.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Cause
- Incorrect installation
- Faulty component
Was this article helpful?
Related Articles
- The cooking zone does not heat
- Hob displays error message E9
- Choosing and installing an Induction Hob (video)
- Can I put a protection mat on the induction hob?
- Causes of cracks across induction or ceramic hobs
- How to use the power settings on a hob with slide controls (video)
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- TotalFlex Hob will not detect pans and cookware
- Hob blows/ trips fuse
- Hob displays error message E7
Related Articles
- The cooking zone does not heat
- Hob displays error message E9
- Choosing and installing an Induction Hob (video)
- Can I put a protection mat on the induction hob?
- Causes of cracks across induction or ceramic hobs
- How to use the power settings on a hob with slide controls (video)
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- TotalFlex Hob will not detect pans and cookware
- Hob blows/ trips fuse
- Hob displays error message E7