Gas hob displays message F
Issue
- Gas hob displays message F
- "F" comes on
- One or more burners cannot be ignited on electronic gas hob
Applies to
- Electronic Gas hobs
Resolution
1. Deactivate and activate the hob.
- After light animation, when "F" reappears, touch "||" and then
within 3 seconds. - When you see "0" the fault is reset.
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Choosing and installing an Induction Hob (video)
- Can I put a protection mat on the induction hob?
- Causes of cracks across induction or ceramic hobs
- How to use the power settings on a hob with slide controls (video)
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- TotalFlex Hob will not detect pans and cookware
- Hob blows/ trips fuse
- Hob displays error message E7
- The induction hob is noisy, makes a humming sound
- Induction hob displays error code F or F1
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Choosing and installing an Induction Hob (video)
- Can I put a protection mat on the induction hob?
- Causes of cracks across induction or ceramic hobs
- How to use the power settings on a hob with slide controls (video)
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- TotalFlex Hob will not detect pans and cookware
- Hob blows/ trips fuse
- Hob displays error message E7
- The induction hob is noisy, makes a humming sound
- Induction hob displays error code F or F1