Hob displays error message E0 / E1
Issue
- Hob displays error message E0 / E1 / E011 / E012 / E013
Applies to
- integrated electric (ceramic) hob
- integrated induction hob
Resolution
1. Disconnect the appliance from power for at least 30 seconds.
Note: To restart the appliance, disconnect it from the mains and wait 30 seconds before switching it back on.
In the case of built-in appliances, it is not necessary to physically disconnect the cable - the appliance can be disconnected using the household RCD breaker.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause
- Error messages E0 / E1 / E011 / E012 / E013 indicate a fault with the electronics.
Was this article helpful?
Related Articles
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Introduction to Hob2Hood (video)
- The ignition on my gas hob keeps sparking
- Hot plate cannot be activated or is not operating
- Discoloration on the glass of the induction hob - examples and causes
- How do I connect my electric ceramic or induction cooker to the power supply?
- Gas Hob Ignition Won't Spark
- Induction Hob displays says F or U code
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Induction hob displays error code F or F1