Hood displays error message C or F
Issue
- The hood displays message C or F
Applies to
- Cooker Hood
Resolution
The letter F indicates that the metal grease filters should be cleaned.
After 100 hours of operation, the LED lights up continuously to indicate the saturation of the metal grease filters.
If letter C appears in the display, the activated carbon filter should be cleaned or changed depending on the model.
After 200 hours of operation, the LED flashes to indicate the saturation of the activated charcoal filters.
Refer to the article: Cleaning / replacing the hood's filter.
Filter Saturation indicator reset
Control panel no.1
H (on the diagram above) performs a reset of the Filter Saturation Alarm once filters have been maintained. Press for approximately 2-3 seconds.
Control panel no.2
Press Filter Reminder Key (7 on the diagram above) performs a reset of the Filter Saturation Alarm once filters have been maintained. Press for approximately 2-3 seconds.
For more information refer to your cooker hood user manual.
Was this article helpful?
Related Articles
- How to use the AEG Hob²Hood® function
- The cooker hood is dripping water
- Cooker hood panel unresponsive, activates on its own during the day
- Cooker hood light not working
- Symbols and functions on your AEG cooker hood
- Cooker hood stops during use
- LEDs or lights flash or show an F on the panel of the cooker hood
- Downdraft Extractor will not Retract - Stays Up
- Cooker Hood does not start
- Why is my cooker hood noisy / noise / rattling or whistling sound / louder than expected or usual
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.