Cooker hood lights flash once when switched on and then go off
Issue
- Cooker hood lights flash once when switched on and then go off
Applies to
- Cooker Hoods
Resolution
1. To solve this problem, proceed as follows:
- Reset the hood by removing the plug from the socket for about 2-3 minutes or turning off the power source.
- After the power is connected again, the appliance will work properly.
- Touch the light button only once. Only if the button does not respond, try a second time.
- If you still have an issue you may need to call our resolution team for an engineer visit.
Was this article helpful?
Related Articles
- Downdraft Extractor will not Retract - Stays Up
- LEDs or lights flash or show an F on the panel of the cooker hood
- AEG Cooker Hood Installation Methods Explained
- Why Is My Cooker Hood Noisy? Causes of Rattling, Whistling & Loud Noise
- Cooker hood stops during use
- The cooker hood is dripping water
- How to use the AEG Hob²Hood® function
- Cooker hood code 8.8 in digital format
- Cooker Hood is clogged
- The Hob2Hood function does not work with the cooker hood
Related Articles
- Downdraft Extractor will not Retract - Stays Up
- LEDs or lights flash or show an F on the panel of the cooker hood
- AEG Cooker Hood Installation Methods Explained
- Why Is My Cooker Hood Noisy? Causes of Rattling, Whistling & Loud Noise
- Cooker hood stops during use
- The cooker hood is dripping water
- How to use the AEG Hob²Hood® function
- Cooker hood code 8.8 in digital format
- Cooker Hood is clogged
- The Hob2Hood function does not work with the cooker hood