Installing the robotic vacuum's charge station
Issue
- How to install the robotic vacuum's charge station
Applies to
- robotic vacuum cleaner
Resolution
Please follow the instruction to install the robotic vacuum's charging station.
1. Place the charging station on the floor with the rear side facing the wall.
2. Connect the adaptor to the power supply on the back of the base.
3. Plug in the power cord to the wall socket.
Wind up excessive cord on the back of the base.
4. Make sure there is an empty area of 0.5 m on the sides and 1.5 m in front of the charging base.
Was this article helpful?
Related Articles
- Robotic vacuum could not find charging station
- Get started with your AEG robotic vacuum cleaner
- Updating the smart phone app
- What is the minimum height of furniture under which a robotic vacuum cleaner can operate?
- Robotic Vacuum main brush malfunction: How to Resolve It
- Robotic vacuum stops while running, with no lights, error message or the display is blank
- Robotic vacuum starts to clean just a specific part of the room
- Robotic vacuum doesn’t charge or doesn't seem to finish charging
- If the robotic vacuum gets stuck (under the bed, between the chairs)
- My robotic vacuum cleaner shows error code E17