Iron Aid tumble dryer error message Err
Resolution
Issue:
- Iron Aid tumble dryer displays error message Err
Applies to:
- Iron Aid tumble dryer
Resolution:
1. If the Iron Aid tumble dryer displays error message Err, fill the steam tank up to the MAX. level.
2. If the icons are still flashing, contact an Authorized Service Center.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Tumble dryer displays error message E50
- Tumble dryer has no power
- Tumble dryer displays error code E70
- Tumble dryer displays a padlock
- Tumble dryer not drying, not drying properly, too long drying
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are still wet at the end of the drying cycle
- How long does a full load dry to dry take in a dryer - heatpump vs condenser?
- How to change the dryer door opening directions?
- Water leakage from under the dryer