The display of the dryer shows different running times for the same programme
Resolution
Issue:
- The display of the dryer shows different running times for the same programme
- The actual programme duration differs from the one specified in the user manual
Applies to:
- Heat pump dryer
Resolution:
1. The appliance is working correctly.
The drying duration is calculated according to various parameters, such as:
- ambient temperature
- initial laundry moisture
- load mass and type
The displayed time adjusts to the actual programme duration.
Was this article helpful?
Related Articles
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish
- Light in the drum of the tumble dryer does not work
- AEG tumble dryer care guide: Do's and Don'ts
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer’s water tank is empty
- Warning light(s) of tumble dryer cannot be switched off
- Tumble dryer's Condenser LED is on
Related Articles
- Tumble dryer displays error message E60 and does not heat up
- Condenser tumble dryer taking too long to finish
- Light in the drum of the tumble dryer does not work
- AEG tumble dryer care guide: Do's and Don'ts
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Cleaning tumble dryer filters and condenser
- Start - Pause LED flashes on tumble dryer
- Tumble dryer’s water tank is empty
- Warning light(s) of tumble dryer cannot be switched off
- Tumble dryer's Condenser LED is on