The door of the washing machine does not close properly
Issue
- The door of my washing machine does not close properly
- The washing machine door cannot close completely, the programme does not start
Applies to
- Front loading washing machine
Resolution
1. Make sure the appliance is correctly levelled. Loosen or tighten the feet to adjust the level.
2. Make sure that the washing machine is not overloaded.
If there are too many clothes in the washing machine (overload), the clothes may push so hard on the door that it cannot be closed completely.
Remove some clothes from the drum, close the door and restart the programme.
3. Check whether any laundry is caught between the door seal and door glass.
When clothes are trapped between the door seal and glass the door will not close properly and can cause leakage.
If the above did not solve the problem, we recommend you to book a repair.
Cause
- washing machine not levelled
- too many garments/overloading
- laundry caught between the door seal and door glass
- broken doorlock - service visit recommended
Was this article helpful?
Related Articles
- How to remove transit bolts from your AEG washing machine
- Clothes are too creased after washing in washing machine
- The door of the washing machine cannot be opened
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine stops in the middle of a cycle
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays an error code, how to fix it?
- Why does my washing machine or tumble dryer program end / finish time change and vary?
- Washing machine does not work / does not react