The oven door cannot be opened after pyrolytic cleaning
Issue
- After the pyrolytic cleaning, the oven door can no longer be opened
- The door remains locked after self-cleaning
- The oven door cannot be opened
Applies to
- oven with pyrolytic self- cleaning function
Resolution
During the pyrolytic cleaning, interior temperature reaches up to approx. 500°C, therefore, for safety reasons, the door is automatically locked.
Do not try to open the door until pyrolytic cleaning is complete.
Depending on the model, the padlock symbol is shown on the display
At the end of the cleaning program, the door lock is automatically released when the oven has cooled down. The symbol above goes out.
Further information can be found in the oven user manual
If the oven door remains locked after the appliance has cooled down, turn off the appliance from the mains supply, wait for 10 minutes and then switch back on at the mains supply and restart your appliance.
If the issue persists, please contact our Customer Care Team.
Was this article helpful?
Related Articles
- Oven displays code F102
- How to remove a built-in oven door (video)
- Symbols and functions on your AEG oven or cooker
- Poor baking / roasting results
- Oven displays error code with prefix F
- How to remove oven shelf supports for cleaning
- Condensation in Oven Cavity and Oven Door
- After a power cut how to set the ovens time - AEG
- Oven blows / trips fuses
- How to prove the dough in the oven, if it is not equipped with special programme?