The oven takes a long time to activate from standby and shows three dots on the display
Issue
When pressing the ON button of the oven on standby, it takes some seconds until the oven is ready to be used.
There are three dots shown in the oven display (as shown below).
The oven takes longer than expected to turn on
Resolution
The issue can be resolved by connecting the appliance to the WiFi network.
You can find information on how to connect your appliance to your WIFI in the user manual chapter “Wireless connection”.
After connecting the appliance to your WiFi, the issue should be resolved.
Was this article helpful?
Related Articles
- Why does my oven keep asking to confirm remote connection?
- Before using your AEG oven for the first time
- How to set the clock on an AEG oven
- What Is Defrost Oven Function?
- AEG oven locked (SAFE or padlock): quick fixes and common causes
- Water gets on the kitchen floor when using the oven
- Replacement of oven seal
- Oven clock time changes
- How to use the Aqua Clean function on your Oven
- Resetting PYR or CATA on the oven's display
Related Articles
- Why does my oven keep asking to confirm remote connection?
- Before using your AEG oven for the first time
- How to set the clock on an AEG oven
- What Is Defrost Oven Function?
- AEG oven locked (SAFE or padlock): quick fixes and common causes
- Water gets on the kitchen floor when using the oven
- Replacement of oven seal
- Oven clock time changes
- How to use the Aqua Clean function on your Oven
- Resetting PYR or CATA on the oven's display