Tumble dryer displays error message "Err"
Resolution
Issue
- Tumble dryer displays error message "Err". It appears when there is an attempt at changing a cycle or settings after the cycle has started or chosen option cannot be used with the selected cycle.
Applies to
- Vented dryer
- Condenser dryer
- Heat pump dryer
Resolution
1. Switch the dryer off and on, then select the desired cycle and options.
Additional information can be found in the user manual.
Download the .
2. Make sure that the door is fully closed before starting the programme.
Was this article helpful?
Related Articles
- Tumble dryer blows fuses / trips RCD circuit breaker
- Tumble dryer’s water tank is empty
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Cleaning tumble dryer filters and condenser
- Tumble dryer not drying, not drying properly, too long drying
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Warning light(s) of tumble dryer cannot be switched off
- Condenser Dryer Drain Kit
- How to change the dryer door opening directions?
Related Articles
- Tumble dryer blows fuses / trips RCD circuit breaker
- Tumble dryer’s water tank is empty
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Cleaning tumble dryer filters and condenser
- Tumble dryer not drying, not drying properly, too long drying
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Warning light(s) of tumble dryer cannot be switched off
- Condenser Dryer Drain Kit
- How to change the dryer door opening directions?