Washer dryer displays "check air filter" indicator
Issue
- Washer dryer displays "check air filter" indicator
- Washer dryer displays clean filter indicator
- The app displays message EF7
Applies to
- Heat pump washer-dryer
Resolution
Picture 1. “Clean air filter” indicator
Occasionally the indicator may flash to remind you that both air filters should be cleaned: the primary air filter and the secondary air filter (for the secondary filter, see pictures from 6 to 8). The acoustic signal operates.
- Make sure that the air filter has been cleaned.
- Make sure that the air filter is correctly inserted
- To have best drying performances clean the air filters regularly with warm water and afterwards dry them with a towel.
- Clogged air filter increases the drying time and energy consumption!
Was this article helpful?
Related Articles
- Washer dryer emits unpleasant smell, how to clean the washer-dryer
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Clothes are too creased after washing in the washer dryer
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- LED flashes on the washer - dryer's display
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Wool clothing shrinks after washing in washer - dryer
- How to clean and maintain your AEG washer dryer
- Washer dryer displays error message E30, C3 or emits 3 beeps
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.