Washer-dryer displays error message E50, C9 or F9
Resolution
Issue:
- Washer-dryer displays error messages E50, E59, C9 or F9. This message indicates that a motor fault has occurred.
Refers to:
- Washing machine
- Washer-dryer
Resolution:
- Contact our service department for an appointment.
We recommend that you stop using the device until the problem is solved by a technician. Unplug the power cord and turn off the tap.
Was this article helpful?
Related Articles
- Washer - dryer does not switch on after a drying cycle
- Fabric conditioner runs directly down into the washer-dryer’s drum
- LED flashes on the washer - dryer's display
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays "check air filter" indicator
- Washer-dryer emits noises and shakes while spinning
- Clothes are too creased after washing in the washer dryer
Related Articles
- Washer - dryer does not switch on after a drying cycle
- Fabric conditioner runs directly down into the washer-dryer’s drum
- LED flashes on the washer - dryer's display
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Fluff / lint on laundry after removing from washer - dryer
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washer dryer displays "check air filter" indicator
- Washer-dryer emits noises and shakes while spinning
- Clothes are too creased after washing in the washer dryer