Washing machine displays error message E80 or emits 8 flashes
Issue
- Washing machine displays error code E80 (or any code beginning with E81, E82 etc.). It generally refers to a problem with the recirculation pump or User Interface of your washing machine
Applies to
- Front loader washing machine
- Top loader washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause
- a fault with the recirculation pump or control panel on your machine
Was this article helpful?
Related Articles
- Washing machine is leaking water
- How to clean the rubber seal on my AEG washing machine
- Connected appliances - problems with onboarding and Wi-Fi connection
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- How to change the temperature in the ECO 40-60° program?
- Seal on the washing machine's door is damaged
- Connected appliances - The appliance cannot be registered
- The door of the washing machine cannot be opened
- Can I use washing powder in my AutoDose washing machine?
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes