Fabric conditioner runs directly down into the washing machine's drum
Issue
- Fabric softener runs directly into the drum
- Fabric softener dispenses too soon
Applies to
- washing machines
Resolution
1. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer.
2. Avoid closing the detergent dispenser too hard.
Gently close the detergent drawer at the start of every wash cycle.
3. Clean the dispenser drawer as described in the user manual.
Download user manual.
Tip:
- If the detergent drawer is opened at the start of a cycle, the fabric conditioner flows directly into the drum while the water is filling up.
- It can be checked only after the second time when water fills up. Up to this point, the fabric conditioner should be there.
The maximum level of fabric conditioner is indicated on the lid.
Cause
- Putting too much fabric softener into the compartment
- Pushing the detergent drawer too hard
- Dirt / residue in the dispenser drawer
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine stops in the middle of a cycle
- The washing cycle is shorter / longer than indicated on the display
- Washing machine displays an error code, how to fix it?
- Why does my washing machine or tumble dryer program end / finish time change and vary?
- Washing machine does not work / does not react
- Connected appliances - problems with onboarding and Wi-Fi connection
- Washing machine does not heat up and does not display an error message
- Washing machine displays error message E50
Spare parts & Accessories
Find original spare parts for your appliance in our webshop and have them delivered directly to your door.