Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine does not take detergents / water remains in the fabric softener compartment
- Washing Machine Installation Guide
- How to change the temperature in the ECO 40-60° program?
- How to clean the rubber seal on my AEG washing machine
- Washing Machine Error E10, E11 or C1? How to Fix Water Supply & Drain Issues
- Washing machine emits a burning smell
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine stops in the middle of a cycle
- There is no half load button on my washing machine
Related Articles
- The door of the washing machine cannot be opened
- Washing machine does not take detergents / water remains in the fabric softener compartment
- Washing Machine Installation Guide
- How to change the temperature in the ECO 40-60° program?
- How to clean the rubber seal on my AEG washing machine
- Washing Machine Error E10, E11 or C1? How to Fix Water Supply & Drain Issues
- Washing machine emits a burning smell
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Washing machine stops in the middle of a cycle
- There is no half load button on my washing machine