Why does my washing machine or tumble dryer program end / finish time change and vary?
Issue
- Why does my washing machine, tumble dryer or washer dryer program end time change and vary
Applies to
- Washing Machines
- Tumble Dryers
- Washer Dryers
Resolution
Every wash is different and our machines offer bespoke results. Think of the programme time first presented as a "best guess".
The sensors in the machine after approximately 15 minutes will start to calculate if the wash needs a little longer or if it can save time and energy but not over washing unnecessarily and reducing the time.
The washing machine automatically adjusts the program duration to the amount of washing. The sensor also measures how dirty your laundry is. As soon as the detection is complete, the "kg" indication disappears. You now see the shortened program duration; the washing program starts. Every AEG washing machine has a ProSense load sensor.
As soon as you press the start button, the washing machine weighs how much laundry is in the drum. The drum rotates a few times while "kg" flashes in the display. And the calculating sensors have started to measure and make their calculations.
Was this article helpful?
Related Articles
- Washing machine does not work / does not react
- How to clean and maintain your AEG washing machine and extend its life
- Connected appliances - problems with onboarding and Wi-Fi connection
- Washing machine displays error message E30, C3 or emits 3 beeps
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- How to change the temperature in the ECO 40-60° program?
- Removing and cleaning a washing machine detergent dispenser drawer
- How to connect your AEG washing machine, tumble dryer or washer dryer to the app
- What's the difference between spin classes in washing machines?