AEG app doesn't update after filter replacement
Issue
- I just replaced my filter but the filter usage in the app doesn't update. What should I do?
Applies to
- AEG AX9 series air purifiers
- AEG AX5/AX7 series air purifiers
- AEG app
Resolution
1. Unplug the device and wait 10 seconds
2. Plug the device again
3. Check to make sure that the new filter is oriented correctly, so the RFID sensor can detect it.
AX5/AX7 only: The RFID tag should be facing the upper right side of the filter compartment in the air purifier as shown below
4. Turn on the air purifier
5. Check in the app if the filter lifetime is updated
Was this article helpful?
Related Articles
- How should I clean my air purifier?
- AEG Wellbeing App - my WiFi network does not appear in the app
- What do the symbols on the air purifier display mean?
- AEG Wellbeing App - Can I get a longer graph of longer time on the indoor air quality values?
- How much ozone does my air purifier release?
- What data does the air purifier measure?
- Why does my AX5/AX7 air purifier show very high TVOC values?
- Air purifier Wi-Fi connection problems
- What filters are available for my AX5, AX7 and AX9 purifier?
- How to clean and maintain your AEG air purifier