Cooker hood lighting cannot be switched off
Resolution
Issue:
- Cooker hood lighting cannot be switched off
- The touch buttons do not react
Applies to:
- Cooker hoods (with touch buttons)
Resolution:
1. To solve this problem, proceed as follows:
- Reset the hood by removing the plug from the socket for about 2-3 minutes or turning off the power source.
- After the power is connected again, the appliance will work properly.
- Touch the light button only once. Only if the button does not respond, try a second time.
Cause
- If the touch button for the lighting is pressed several times and quickly in order to switch off the light, sometimes the electronics do not react. The lighting stays on.
Was this article helpful?
Related Articles
- How to clean the filters on your AEG cooker hood
- How to use the AEG Hob²Hood® function
- Cleaning the external surface of the cooker hood
- The Hob2Hood function does not work with the cooker hood
- Hood displays error message C or F
- Symbols and functions on your AEG cooker hood
- What is the adaptor I need to connect rectangular to circular ducting on a ceiling hood or Extractor Hob for example? M2CKCF02
- Downdraft Extractor will not Retract - Stays Up
- Cooker hood stops during use
- The cooker hood is dripping water
Related Articles
- How to clean the filters on your AEG cooker hood
- How to use the AEG Hob²Hood® function
- Cleaning the external surface of the cooker hood
- The Hob2Hood function does not work with the cooker hood
- Hood displays error message C or F
- Symbols and functions on your AEG cooker hood
- What is the adaptor I need to connect rectangular to circular ducting on a ceiling hood or Extractor Hob for example? M2CKCF02
- Downdraft Extractor will not Retract - Stays Up
- Cooker hood stops during use
- The cooker hood is dripping water