Fridge freezer shows code E09
Issue
- Fridge freezer displays error code E09
Applies to
- Fridge freezer
Resolution
- Error code E09 is likely to occur after long term power failure
- Set the freezer temperature to a colder value or set Super Freeze. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Remove any products which have thawed/defrosted during this error. They can be used within a short period of time
- Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer
- If this warning continues an authorised technician needs to be contacted
Cause
- The freezer compartment is not cold enough
Was this article helpful?
Related Articles
- My fridge freezer is not working
- Temperature in the fridge-freezer is too high, too warm, not cooling or not cold
- Cleaning the drain holes in the fridge
- How to install your AEG appliance - video guides
- Temperature in the fridge-freezer is too low
- Unpleasant odour in the fridge freezer
- Why is my fridge frosting up?
- Moisture in the vegetable drawer or under the glass shelf in the fridge
- Water leaking from fridge / fridge freezer
- Drip tray location on integrated fridge freezer