Gas hob displays error message E6
Issue
- Gas hob displays message E6
- E6 comes on
- One or more burners cannot be ignited
Applies to
- Electronic Gas hobs
Resolution
1. Deactivate and activate the hob.
- E6 reappears, touch "||" and then within 3 seconds.
- When you see "0" the fault is reset
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Symbols and functions on your AEG induction hob
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- How to use the power settings on a hob with basic controls (video)
- How to use the child lock and lock function on your AEG induction hob
- Hob displays message L, the hob is locked
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message F
- What Cookware Works on Induction (Complete Guide)
- Hob displays error message E9
- Hob displays error message E2
Related Articles
- Symbols and functions on your AEG induction hob
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- How to use the power settings on a hob with basic controls (video)
- How to use the child lock and lock function on your AEG induction hob
- Hob displays message L, the hob is locked
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message F
- What Cookware Works on Induction (Complete Guide)
- Hob displays error message E9
- Hob displays error message E2