How to turn off DEMO mode in Electronic gas hob?
Issue
- Electronic gas hob display is working, but no sparking and no gas flowing
- How to turn off DEMO mode in Electronic gas hob?
Applies to
- Electronic gas hobs
Resolution
Starting with the hob on
1. Touch the on/off button for 3 sec, until display is switched off.
- Then touch Hob2Hood button for 3 sec until timer display is switched on.
- When demo mode is on, the display will show "do".
2. Touch the + button, the "o" will disappear.
Note: Demo Mode is active until it is deactivated, a power cut/switching the hob off and on again will not deactivate it
Was this article helpful?
Related Articles
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Hob sealing strip replacement
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Electric Hob Installation Faults: Causes & Recommended Solutions
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Hob displays error message E8 / E822
- Hob displays message L, the hob is locked
- Hob displays error message E7
- Hob displays message U or | |
- Only one side of the hob is operating