Integrated built-in dishwasher door stuck closed
Issue
- Integrated built-in dishwasher door stuck closed
Applies to
- Integrated dishwashers
Resolution
- Check the appliance is not still performing a cycle
- Make sure the dishwasher is correctly levelled, try adjusting the appliance feet and checking with a spirit level.
- Contact the engineer who installed the appliance to ensure the latch and door have been installed in accordance with the instruction manual. If you are having issues the appliance may have been installed incorrectly - contact your installer to check if the door requires adjustment.
- Reset the appliance, switch off the power to the appliance then switch it back on again after 20 - 30 seconds. Test if the appliance is working
- You may require a visit by a service engineer
Cause
- Misalignment of latches and or hinges can cause the dishwasher door not to open and close properly and become crooked
Was this article helpful?
Related Articles
- Dishwasher installation (Fixed door)
- Dishwasher does not beep at the end of the cycle
- Dishwasher does not dry or dries poorly
- Dishwasher displays error code i30
- How to adjust water hardness level in dishwasher
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Program not starting and cycle indicator light flashing on dishwasher
- Dishwasher displays error code I20, C2, F2 or AL6, or beeps twice, not draining
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwasher Tablets Do Not Fully Dissolve / Left In the Base